ZHD 2500-130/150
24
Installation
www.zepro.com
0-100 mm.
Max. 25 mm
Max. 25 mm
Min. area: 350 cm
2
• Horizontal distance from the outer edge of the beam
to the outside of the wheel: Max. 100 mm. See
figure 28.
• The lateral distance between the underrun
protection and the moving parts of the tail lift
must not exceed 25 mm. See figure 29.
• Each of the individual parts of the underrun
protection must have a surface area of at least
350 cm
2
. See illustration.
Image 29. Statutory dimensions
Image 30. Statutory dimensions