ZHD 2500-130/150
30
Installation
www.zepro.com
~ 10 mm
A
Max. 30 mm
Image 47. Adjusting the tilt angle
Image 48. Installing boots
10. Tighten the lock screws of the adjusting collar
using a torque wrench.
Tightening torque: 3-5
Nm.
After finishing the adjustment, make sure the
distance between the adjusting collar and the
end of the thread is no more than 30 mm.
m
WARNING!
11. Fit the cylinder boots. Image 48.
Lift model
A
2500-130
142 ±5
2500-150
252 ±5
