ZHD 2500-130/150
62
Disassembly
www.zepro.com
15
Disassembly
If the tail lift has to be removed from the vehicle, for example to transfer it to another vehicle, for storage or
for modification, please follow these instructions.
1. Support the platform with a crane or similar equipment that can safely carry the platform's
weight (see weight info.).
2.
Dismantle the tilt cylinders’ upper axle from the platform and rest the cylinders on the
ground.
3. Run the tilting cylinders to their minimum stroke limit to remove pressure from the circuit.
4. Dismantle the axles. Knock them out with a hammer and suitable drift.
5.
Lift off the platform.
6. Raise the lift arms to their highest position.
7. Disc12-24 V from the control card.
8. Disconnect all control devices from the control card.
9. Support the support frame from beneath, for example with a car jack.
10. Remove the support frame from the vehicle chassis by loosening the bolts and carefully
lowering the support frame to the ground with a car jack.
