ZT MK2
Safety rules
15
www.zepro.com
3.4
Rear beam cut-outs
It is often necessary to create cut outs in the rear beam to provide space for the platform arms when the
platform is in the uppermost position. The size of the cut outs depends on the calculated installed dimen-
sion “A”, see illustration below.
1. Measure and mark the location and depth of the cut outs on the rear beam. The two cut outs must be
centred on the rear beam, i.e. both cut outs must be an equal distance from the mid-point of the beam.
2. Cut along the markings.
3. Grind away any burrs or sharp edges.
Picture 15. Rear beam cut-outs
245
245
A
max
650
All dimensions specified in millimetres
