23
22
EN
1.
2.
3.
1. Press the light button and hold for 2 seconds.
2. The light indicator is activated.
3. Quiet night mode.
4. When the quiet night mode is set, the variable light (MOOD LIGHT) is automatically
turned off.
• Press the light button and hold for 2 seconds again. The light will turn off and the
quiet night mode will continue.
1. Press the light button and hold for 2 seconds.
2. The light indicator is turned off.
3. Quiet night mode.
4. When the quiet night mode is set, the intensity of the light emitted is reduced
by 50%.
• The mood light shines in different colours depending
on the operational mode selected:
− Automatic /manual – blue
− Children’s mode – violet
− Rhythmic mode – blue - pink - violet - red
The mood light is reduced by 50% if the quiet night mode is selected.
6. CLEANING
ATTENTION!
Always unplug the appliance from the power socket before
cleaning.
4
Cleaning the appliance casing
• Use a dry, soft cloth to clean the appliance.
If necessary, use a slightly damp cloth, but no polishing
agents.
4
Cleaning the particle sensor
(once every two months)
• Open the cover of the particle sensor on the
right side of the appliance. Use a slightly
damp cotton bud (Q-tip) to clean the lens
and collect any remaining moisture.
4
Cleaning the air inlets and outlets
Clean the air inlets and outlets with a soft brush.
Take care not to drop the brush into the appliance.
4
Cleaning the negative ion generator
(once every two months)
Use a dry cotton bud (Q-tip) to dust the tag.
Take care not to drop the cotton bud (Q-tip) into the
appliance.
4
Cleaning the front cover
• Remove the front cover of the appliance and use a dry
cloth or soft brush to dust it.
If necessary, use a slightly damp cloth, but no polishing
agents.
4
Cleaning the lens on the back of the cover
(
once every two months)
Remove the front cover of the appliance and use a dry
cloth, a soft brush or a cotton bud (Q-tip) to dust the
mood light on the back of the front cover. If necessary,
use a slightly damp cloth, but no polishing agents.
Cleaning the pre-electrostatic filter
(once every 2-4 weeks)
OPERATING INSTRUCTIONS
