EN
15
2
1
3
4
7
8
9
5
6
Advantages of non-stick ceramic coated soleplate
• Ceramic does not stick to synthetics or fabric blended with spandex (follow
recommended temperatures)
• Ceramic does not create static electricity, so it helps keep synthetics from clinging.
• Ceramic is a good conductor of heat and this helps to distribute it evenly
across the surface it covers
NOTE: Ceramic soleplates can pick up colour from natural fibres and
will become darker over time. This will not affect the functionality of
the iron.
12 - IRONING
TUTTOSTEAMY IS AN EFFECTIVE REMEDY AGAINST MITES
CAUTION!
• Never use with wet hands or feet.
• Always remove the steam cleaner plug from the socket before connecting
the iron.
• The steam tube should never come into contact with the sole plate of the
iron or any sharp objects or corners.
Only place the iron on the specially-designed base.
• Never leave the iron unattended while connected to the appliance.
SUITS SHIRTS PULLOVERS
PART
FUNCTION
Rubber mat
Insulated protection to rest the iron on
Steam switch (Pressure key)
Steam release during ironing.
(Push- button with locking function)
Iron status LED light (red)
Shows when the iron is ready for use
Iron temperature regulation DIAL
For the adjustment to the required
ironing temperature
Iron steam cable with plug
For connecting to the steam cleaner
Non-stick ceramic coated
soleplate
Easier and smoother movements on
the fabric surface
1 Iron body
2 Steam locking button
3 Iron temperature
regulation dial
4 LED
temperature
indicatiors
5 Steam push button
6 Iron status LED light
7 Iron power cable with
plug
8 Ceramic soleplate
9 Rubber mat
CONNECTING THE IRON
Pour the water into the boiler
(see point 1 of chapter 9 “Filling with water”).
(Pictures A + B).
a) Lift the socket cover (11), ensure that the pin is turned upwards and insert
it into the socket cover opening. Plug the iron into the socket. Release the
socket cover. (picture C).
b) Connect the power cable to the power supply,turn on the main switch (4)
and the heating switch (5).
c) Set the desired temperature with the iron temperature regulator (3) (picture D).
Set the steam intensity with the steam regulator (10) on the machine to position 3.
When the green light comes on (7), it means that the iron is ready for use.
