Zepter Z-993R, Instruction Manual

14

DO NOT attempt to repair a defective unit. Take it to a Zepter Service Centre.

TROUBLESHOOTING

PROBLEM

SOLUTION

When being plugged in, the Zepter 

Radio Induction Cooker does not 

beep, and the power indicator is 

not on.

•  Make sure the plug is inserted properly. 

•  Make sure the cookware is placed in the 

    centre of the induction board. 

•  Make sure the wall socket is functioning.

The warning beep sounds 

continuously and the cooker stops 

after 15 seconds.

•  Check whether the cookware is suitable for 

    induction cooking. 

•  Check whether the cookware is placed in the    

    centre of the ceramic plate. 

•  Check whether the diameter of the cookware is 

    greater than 8 cm.

The heat suddenly stops during 

operation.

•  Check whether the surrounding air temperature 

    is too high. 

•  Check whether the ventilation holes are blocked. 

•  When the set temperature is reached, 

    the machine will switch to Keep Warm mode. 

•  The protection device may be in operation; 

    please wait for about 10 minutes and check  

    again.

Cannot adjust temperature when in 

operation.

•  Make sure that the base of the cookware is 

    even and that it is not caving in at the centre.

INFORMATION FOR USERS

In  accordance  with  European  Directives  2002/95/EC,  2002/96/EC  and  2003/108/EC  on  the 

restriction of the use of dangerous substances in electric and electronic equipment, as well as their waste 

disposal, the barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its 

useful life, the product must be collected separately from other waste.

Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities.

Any  products  that  have  reached  the  end  of  their  useful  life  must  be  given  to  waste  disposal  centres 

specialising in the separate collection of electrical and electronic waste, or given back to the retailer at the 

time of purchasing new similar equipment, on a one for one basis. Ensuring such equipment is recycled, 

treated  and  disposed  of  in  an  environmentally  compatible  way  helps  prevent  the  potentially  negative 

consequences for the environment and human health that could otherwise be caused by inappropriate 
waste disposal, and optimises the recycling and reuse of components making up the apparatus.

DISPOSAL INFORMATION