Zero 88 01-201-00, Operating Manual

Clear Memories

This option allows the user to clear all
of the 12 memories.

Select the 

Clear Memories

 option from

the Memories menu. The LCD shows:

<Clear Memories>
                

Press the ENT key, the LCD shows:

Press ENT key to
 clear memories 

Press the ENT key to clear all the
programmed memories and 
sequences.

The LCD returns to the 

Memories

screen.

Edit Memory

This option allows the user to edit the
channel values and fade time of a
memory for a selected area.

Select the 

Edit Memory

 option from the 

Memories menu. The LCD shows:

<  Edit Memory >
                

Press the ENT key, the LCD shows:

 Area:     1    
 Memory:  XX    

The cursor appears in the Area field
which defaults to area 1.

Use the numeric or cursor keys to
select the required area (1 - 10) and
then press the ENT key.

If the area is valid, the cursor moves to 
the Memory field.

If the area is not valid, the Memory
field displays “N/A” and the cursor
remains in the Area field.

When the cursor is displayed in the
Memory field - use the numeric or
cursor keys to select the required
memory number. 

Unprogrammed memories are
indicated by a ‘*’ next to the memory
number and cannot be edited.

Press the ENT key to confirm the
memory selection.

Assuming the selected memory is
programmed, the networked dimmers
output the selected memory and the
LCD shows the following:

(A01)Channel: 1 
    Level: xxx  

The cursor is displayed in the 

Channel

field. The channel number defaults to
the first channel in the selected area.

The 

Level

 field shows the programmed 

value for the channel in the selected
memory.

Adjust the level of each master
channel as required. This operation
uses the same user interface as the

Set Channel Level

 function in 

Manual

Control

 (see earlier).

Press the 

ESC

 key to move to the

memory fade time screen:

Area xx Mem xx  
Fade Time: xx   

The Area and Memory fields are for
information only. The cursor appears in 
the Fade Time field.

Use the numeric or cursor keys to
adjust the fade time as required (1 - 60 
seconds). 

Press the ENT key to save the fade
time and channel levels in the memory.

The LCD shows the following screen
for approximately one second before
returning to the 

Edit Memory

 screen.

Area xx Mem xx  
     Saved 

On exiting edit mode - the memory is
removed from the dimmer outputs.

3 - 18 

Chilli Master Controller 73-861-00 Issue 3

User Interface