Configuration
Configuration is achieved via the internal web server or via Art-Net. In order to restore the product to its factory default
state, hold down the reset button and cycle the power.
Web Server
To configure Gateway 4 via the internal web-server, either type in the IP address of the product or, if your web-
browser supports NetBios, type “Gateway4". To find the IP address, use DMX-Workshop.
IP Settings
The IP settings for the product are displayed in the top section of the
screen. The Edit control allows the static IP, subnet mask and gateway
to be configured. DHCP operation can be selected via DMX-Workshop.
The indicator meanings are as follows:
Online: Green = live connection between browser & product;
Red = connection lost
Power: Green = powered; Flashing green = Identify; Red = Fault
Net: Yellow = Link; Green = Art-Net or sACN activity
Zero 88 - Gateway 4 - Page 11 of 16
Printed: 24/11/2020 14:34:53 ES
