Betapack 4 User Manual v1
9850-000753-00
Page 3 of 12
Introduction
Thank you!
Thank you for choosing Betapack 4 by Zero 88 to fulfil your
lighting power needs. We sincerely hope that your new unit
will bring you years of trouble free service. We make great
efforts to build in reliability and serviceability at every stage
of our development and production processes and include
a three-year limited warranty - giving you peace of mind for
your investment.
Our extensive dealer network can also provide you with
technical service and sales support in your local language
no matter where you are in the world. If you have any
questions, comments or problems our contact details can
be found at
zero88.com/support
Once again, thank you for choosing Zero 88.
To remove the cover
Isolate and disconnect Betapack 4 from the mains supply.
The mains supply terminals (and output terminals on the
hardwire version) are located under the top cover. To
remove the top cover, remove the four screws “A” in
Diagram 5 from the side plates.
The Triacs (type BTA40-600A/B) are located under the
bottom cover. To remove the bottom cover, remove the
four screws “B” in Diagram 5 from the side plates.
.
Diagram 1
WARNING!
Do not remove the covers without first completely disconnecting Betapack 4 from the mains supply
