User Definable Keys (UDKs)
Page 102
ORB Operating Manual – Issue 1.0
Fixture UDK
The Fixture UDK is used for selecting an individual fixture. To assign
a fixture to a UDK, enter either of the following commands:
n RECORD <UDK>
When the UDK is pressed, the fixture assigned to the UDK is
selected.
Palette UDK
The Palette UDK can be used as an alternative method of outputting
a palette for the currently selected fixtures. To assign a palette to a
UDK, enter one of the following commands:
COLOUR n RECORD <UDK>
BEAM n RECORD <UDK>
POSITION n RECORD <UDK>
EFFECTS n RECORD <UDK>
The palette assigned to the UDK is applied to the selected fixtures
when the UDK is pressed.
Macro UDK
The Macro UDK is used to run the user defined macro assigned to
the UDK.
To assign a user defined macro to a UDK enter the following
command:
MACRO n RECORD <UDK>
The macro is run by pressing the UDK.
Changing UDK Page
The UDK Page number can be changed by using the UDK PAGE key.
Enter the syntax:
UDK PAGE n ENTER
The UDKs will change to the requested page.
The UDK Window
To display the
User Definable Keys Window
on one of the
monitor displays, hold down the SHIFT key and press one of the
User Definable Keys:
Figure 75 – UDK Window
This window shows information on the current page of User
Definable Keys. Each of the 10 UDK’s has a button in the window.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
