Setup
Page 46
ORB Operating Manual – Issue 1.0
To patch further duplicates for the selected fixture move the cursor
to the Duplicate 2 Column, Duplicate 3 column etc and repeat the
above procedure.
When duplicates are patched for the selected fixture(s) additional
columns are added to the Edit Fixtures table (one column per
duplicate address) as shown in the following example:
Figure 36 - Edit Fixtures (Duplicates)
Multi-Part Fixtures
For multi-part fixtures (eg Lamp + Scroller) the different parts of
the fixture are displayed on separate lines in the Edit Fixtures patch
table.
There is an additional column (Part) which shows the part name of
the multi-part fixture and a [Fixture Part] button that selects which
part of the fixture is displayed on the screen (eg All Parts, Lamp,
Scroll).
Figure 37 - Edit Fixtures (Multi Part fixtures)
DMX In Field
It is possible to assign a DMX-In address to any fixture on ORB.
The DMX-In field in the patch table shows the DMX In address
which is currently assigned to the fixture.
The DMX In channel is used to control the brightness (intensity)
parameter of the fixture, and is mixed LTP with the level on the
desk so you can grab and alter the level of a channel in such a way
as you would expect on a generic fader based desk.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
