Setup
Page 60
ORB Operating Manual – Issue 1.0
Loading Shows
To load a show, connect the storage media to the USB port on the
desk (any port).
If you’re using an external floppy drive, remember to insert the
floppy disk into the drive.
Press the [Files], then [Load Show]. The Load Show Window is
displayed:
Figure 49 - Load Show
Select the storage device by pressing on the [Source Device] toggle
box. This will cycle through all the available devices, so select the
one you require.
Select the required show from the list of available shows displayed.
Select the [Load Complete Show] box and toggle it until it displays
the option you require. The ORB allows you to load just the Setup,
the Setup and Palettes, or the Complete show.
Press the [OK] button to load the show.
Note – Loading Shows
Loading a show file will clear any existing show data from the desk
so ensure that you have backed up your previous show before you
load another one onto the desk.
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
