Cues, Stacks & Pages
Page 92
ORB Operating Manual – Issue 1.0
The stack(s) on the master playback can be released by specifying
the stack number(s) in the release command, eg SELECT STACK 2
RELEASE..
The command SHIFT RELEASE releases all cue stacks on the virtual
playbacks as well as those on the physical playbacks.
Copying Cues
To copy a cue to another cue in the same cue stack or a different
cue stack enter the following command:
s1/c1 COPY TO s2/c2 ENTER
(copies stack S1 cue C1 to stack
S2 cue C2).
To copy a range of cues to another location enter the following
command:
s1/c1 THRU c2 COPY S2/c3 (copies stack S1 cues C1 through to C2
to stack S2).
When copying bear in mind that only the tracking changes stored
within that cue will be copied. To copy the outputting state of a
cue, do the following:
•
Output the cue (using normal playback methods)
•
Turn ON the SMART TAGS function
•
RECORD the cue using normal record syntax
•
Turn OFF the SMART TAGS function
Using this method the Smart Tags function will copy the outputting
values into the cue required, setting any tags required at the output
stage.
Moving Cues
To Move a cue to another cue in the same cue stack or a different
cue stack enter the following command:
s1/c1 MOVE TO s2/c2 ENTER
(Moves stack S1 cue C1 to stack S2 cue C2).
To move a range of cues to another location enter the following
command:
s1/c1 THRU c2 MOVE TO s2/c3
(Moves stack S1 cues C1 through to C2 to stack S2).
Deleting Cues
To delete a single cue enter the command:
S/C DELETE or DELETE S/C ENTER.
To delete a range of cues enter the following command:
DELETE S/C1 THRU C2 ENTER.
Note – Deleting Cues
Since the ORB desk is a tracking based console, deleting a cue from
a cue stack could possibly affect other cues in that stack. Think
carefully about whether you need to make any changes to
subsequent cues in order to maintain the state(s) required.
Cue Stacks
The ORB desk provides 1000 user programmable cue stacks.
A programmed cue stack contains one or more programmed cues.
The 1000 cue stacks are assigned to the 100 pages of playbacks.
Cue stacks can be setup, named, copied, moved and deleted.
Cue Stack Directory Window
To display the
Cue Stack Directory Window
on the monitor hold
down the SHIFT key and press the SELECT STACK key:
Summary of Contents for ORB
Page 1: ...ORB OPERATING MANUAL...
