9
Author: RK
Version: 2.3
Revision: 1.4
Revision Date: February 2022
and no yellow tipping or sooting.
-
Check the door/lid seals are in good condition.
IN THE EVENT OF FAILURE
If the burner will not light:
-
Check adequate gas supply – through to burner.
-
Depress flame failure device for 15sec and try lighting with a match.
This must be done in a well ventilated area!
QUALIFIED TECHNICIAN
-
Check jet is clean – if not, clean with solvent and blow dry. Do not try
to clean with pin or similar.
-
If the burner will not stay alight, check position of the thermocouple
head, and the functioning of the safety valve.
If not cold enough:
-
Check through points listed under Troubleshooting.
-
In the unlikely event of cooling unit failure, contact the national
distributor without delay.
Note:
This appliance:
-
Is to be used for domestic purposes only, and not for business or
commercial use.
-
Should not be used for freezing liquids like cold drinks and ice creams.
