zero
HOME AUTOMATION
Z02 - SWING GATE
PG7
It is very important that these dimensions are respected! Only this way can be
assured the correct functioning and durability of the operators!
Legend:
Dimension X - Horizontal distance between hinge axis of the door and the rear axle of
the motor.
Dimension Y- Vertical distance between hinge axis of the door and the rear axle of the
motor.
Dimension W - Distance between axis of the motor brackets
01 • Fixing rear support
• The Rear support must be fixed to the
pillar or wall using dimensions provided in
the preceding pages.
It can be fixed using screws with mechani
-
cal bushing or chemical welding process,
or one of your choice since it provides an
appropriate support.
02 • Fixing front support
• The Front support should be fixed to the
gate, respecting height dimensions and di
-
stance to the rear support.
This may be fixed by using screws, welding
process, or to choose another long as it
provides a secure proper support.
INSTALLATION STEPS
X
Y
W
Z02.400
95°
120-180
120-180
1095-1100
120°
160-180
120-140
1095-1100
Z02.600
95°
120-350
120-200
1495-1500
120°
200-280
120-200
1495-1500
OPENING ANGLE
