The cursor is shown in the Channel field. The Level field shows the programmed value for the channel.
Adjust the level of each channel as required. This operation uses the same user interface as the Set Channel Level
function in Manual Control.
Press the ESC key. The screen shows:
Memory: xx
Fade Time: xx
The Memory field is for information only. The cursor appears in the Fade Time field.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 - 60 seconds).
Press the ENT key to save the fade time and the channel levels into the memory. The screen briefly shows a
confirmation, and then returns to the Edit Memory screen.
The memory is removed from the outputs.
ChilliNet Mode
This option allows you to edit the channel values and fade time of a programmed memory for a selected area stored
on the dimmer.
Select the Edit Memory option from the Memories menu, and press the ENT key. The screen shows:
Area: 1
Memory: xx
If the memory for the chosen area is unprogrammed - a star (*) is shown next to the memory number and the
memory cannot be edited.
The cursor appears in the Area field. Enter the required area number using the numeric keypad or cursor keys, then
press the ENT key.
If the area number is valid, the cursor moves to the Memory field.
Use the numeric keypad or cursor keys to select the required memory (1 - 12), then press the ENT key to confirm.
If the memory for the chosen area is programmed - the dimmer outputs the selected memory and the screen shows:
A(xx) Channel: 1
Level: xxx
Zero 88 - Chilli Pro - Page 24 of 60
Printed: 23/03/2021 09:13:40 ES
