Lock Dimmer
Code: xxxx
Use the numeric keypad to enter a 4 digit code and then press the ENT key. The screen shows:
Confirm Code
Code: xxxx
Re-enter the same 4 digit code and then press the ENT key to confirm.
If the codes match - the dimmer is locked, the screen returns to the main screen, and all menu access is disabled.
If the codes do not match - an error message is briefly shown, and the screen returns to the Lock Dimmer screen
above.
Unlocking the Dimmer
If the dimmer is locked, the main screen will be shown, and all menu access will be disabled.
If the ENT key is pushed in order to gain access to the menus, the screen shows:
Dimmer Locked
Code: xxxx
Enter the 4 digit code using the numeric keypad, and then press the ENT key.
If the correct code is entered - the dimmer is unlocked, and the screen shows the first screen in the top level menu
structure (Manual Control).
If an incorrect code is entered - an error message is briefly shown and the screen returns to the main screen.
ChilliNet
This option puts the dimmer into ChilliNet mode so that it can be controlled remotely by other ChilliNet devices. The
main ChilliNet devices used to control Chilli dimmers are Chilli wall control panels, however other ChilliNet devices
may include other Chilli Dimmers on the network, or the legacy Chilli Master Controller, all via ChilliNet messages.
For the network to function correctly each dimmer on the network must have a unique dimmer number.
Select the Chilli Net option from the top level options menu, and press the ENT key. The screen shows:
Zero 88 - Chilli Pro - Page 43 of 60
Printed: 23/03/2021 09:13:40 ES
