Click the available options to find out more...
Program Sequence
Playback Sequence
Sequence Options
Clear Sequence
Program Sequence
Standard Mode
This option allows you to program one of the three sequences, using the programmed memories in the dimmer.
Select the Program Sequence option from the Sequences menu, and press the ENT key, the screen shows:
Select
Sequence: 1
Use the numeric or cursor keys to select the required sequence number, then press the ENT key. The screen
shows:
Seq 1 Step: 1
Memory: xx
The cursor appears in the Step field.
The Memory field shows the contents of the step, if programmed, or “xx” if the step is not programmed.
Select the first step in the sequence, then press the ENT key. The cursor moves to the Memory field.
Use the cursor keys to select one of the programmed memories in the dimmer. Press the ENT key to assign the
memory to the selected step. The cursor returns to the Step field.
Use the cursor keys to select the next step in the sequence, then press the ENT key. The cursor moves to the
Memory field.
Use the cursor keys to select one of the programmed memories in the dimmer. Press the ENT key to assign the
memory to the selected step. The cursor returns to the Step field.
Repeat the above process until all the steps in the sequence have been programmed (maximum of 12 steps).
Zero 88 - Chilli Pro - Page 26 of 60
Printed: 23/03/2021 09:13:40 ES
