The cursor appears in the X-Fade Time field. Use the numeric keypad or cursor keys to adjust the fade time as
required (range 1 - 60 seconds).
Press the ENT key to confirm the crossfade time. The cursor moves to the Dwell Time field.
Use the numeric keypad or cursor keys to adjust the dwell time as required (range 1 - 600 seconds).
Press the ENT key to confirm the dwell time. The cursor moves to the X-Fade Time field.
Clear Sequence
This option allows you to clear any of the sequences in the dimmer.
Select the Clear Sequence option from the Sequences menu, and press the ENT key, the screen shows:
Select
Sequence: 1
Use the numeric keypad or cursor keys to select the required sequence, then press the ENT key, the screen shows:
Push ENT key to
clear sequence
Press the ENT key. The screen returns to the
Clear Sequence screen.
Preheat
Select the Preheat option from the top level menu options, and press the ENT key to enter the Preheat menu. The
following two options are available:
Set Preheat
This option allows you to set up a preheat level (between 0 - 20%) for each of the dimmer channels.
Select the Set Preheat option from the menu, and press the ENT key. The screen shows:
Zero 88 - Chilli Pro - Page 30 of 60
Printed: 23/03/2021 09:13:40 ES
