Dimmer No
Already Used
Area Control
This option is only available when the dimmer is in ChilliNet mode.
This option allows you to assign each of the dimmer channels to an Area (1 - 10).
Dimmer channels may be assigned individually or all the dimmer channels may be assigned to the same area. This
allows you to playback memories and sequences across the network on an area basis.
Select the Area Control option from the top level menu options, and press the ENT key to enter the Area Control
menu.
The following options are available:
Set Channel Area
This option allows you to assign an area to each of the dimmer channels individually.
Select the Set Chan Area option from the menu, and press the ENT key. The screen shows:
Channel: 1
Area: 1
The cursor is in the Channel field. Press the ENT key to move between the Channel and Area fields, and adjust the
values using the cursor keys and numeric keypad.
Repeat operation for each channel.
Set All Channels
This option allows you to assign an area to all the channels on the dimmer in a single operation.
Select the Set All Chans option from the menu, and press the ENT key. The screen shows:
All Channels
Area: 1
Zero 88 - Spice - Page 42 of 47
Printed: 10/03/2021 09:32:33 ES
