Cords, Cables and Connectors
For the Air Set
Ground Set Power Cord
Connect one end to the Ground Set Adapter.
Plug the other end into the Power Port of the
Ground Set.
Ground Set Antenna
Attach this to a Ground Set Antenna Extension.
Ground Set Antenna Extension
Connect one end to a Ground Set Antenna and plug
the other end into a Ground Set Antenna Port.
Air Set Antenna
Plug into the Air Set Antenna Ports A1 and A2
(default ports), or A1' and A2' (backup ports).
Air Set Power Cord
Plug one end into the Power Port on a ZEROTIME
Air Set and plug the other end into a DC power
outlet.
For the Ground Set
UART Connector
Insert
Ł
of the split end into the COM port on the
flight controller and insert the other end into the
UART port of the Air Set.
UART Connector
Insert
Ł
of the split end into the COM port on the
flight controller and insert the other end into the
UART port of the Ground Set.
Backup Power Cord
Connect one end to a power source and the other
end to an Air or Ground Set Power Port. Use
compatible adapters when necessary.
ŀ
Ł
ł
ŀ
Ł
ł