Installation Guide
Air Set Installation
喍
with UART port for flight controller
喎
Connect the MINI-HDMI Signal In Port on the Air Set to the HDMI port of a camera.
Plug the Air Set Anetennas into the Air Set Antenna Ports A1 and A2.
Connect the UART port on the Air Set to a flight controller using a UART Connector.
Connect the Air Set to a power source.
ŀ
Ł
ł
Ń
Set the camera's outgoing signal to HDMI format and make sure its resolution matches that of the Air Set. The Air Set's
default resolution is 720P60, which can be changed using the ZEROTIME Mobile App.
Use only the antennas designed for this device and install them carefully.
To protect the circuit and hardware, install antennas before connecting the device to power.
Use power source between 8V-12V. The manufacturer recommended power is 12V DC.
After connecting to power, check the fan of the Air Set. If the fan is not spinning properly, unplug the Power Cord and check
the installation.
dž
dž
dž
dž
dž
喆
ZEROTIME-ZT3024A
AIR
MINI-HDMI IN
UART
POWER
A1
A2
Flight Controller
COM
Camera
HDMI
Power Source
Air Set Antennas