Ground Set Installation (with UART port for remote control)
Connect the MINI-HDMI Signal Out Port on the Ground Set to a display device.
Attach the Ground Set Anetennas to the Ground Set Antenna Extentions and then push the
Entension Cords firmly into the Ground Set Antenna Ports A1 and A2.
Connect the UART Port on the Ground Set to a remote control using the UART Connector.
Connect the Ground Set to a power source using the Power Cord and the Adapter.
ŀ
Ł
Use only the antennas designed for this device and install them carefully.
To protect the circuit and hardware, install antennas before connecting the device to power.
Use power source between 8V-12V.
After connecting to power, check the fan of the Ground Set. If the fan is not spinning properly, unplug the Power Cord and
check the installation.
dž
dž
dž
dž
喆
ZEROTIME-ZT3024G
GROUND
MINI-HDMI OUT
UART
POWER
A1
A2
Remote Control
UART
Display Device
HDMI
Power Source
Ground Set Antenna
Extensions
Ground Set
Antenna
Ground Set
Antenna
ł
Ń