Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752555 option 1
or email:
sales@zest4leisure.co.uk
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit.
BBQ Side Table is now complete.
1.
Attach Lower Shelf A to Legs B using 2no Screws per leg, ensuring correct
orientation of Legs B -
Section ‘x’ lowermost (Fig.1a).
Position Upper Shelf C as shown in Fig.1b and attach using 2no screws per leg.
2.
Invert Table Top D and place on flat surface. Position Diagonal Bracing E as
shown in Fig. 2a and attach using 2no Screws (Fig.2b). Repeat process for
remaining Diagonal Bracings.
3.
Place Table Top assembly onto Leg/Shelf assembly, align Diagonal Bracings E
with Legs B and fix in position using 2no Screws per bracing.
4.
Attach Table Top D to Legs B using 1no Screw per leg as shown in Fig. 4.
