zesto CE 2416, Owner'S, Service & Instruction Manual

REF #0907-53

TEMPERATURE CONTROLLER:

NOTE

: 

* DON’T  TOUCH THESE ADJUSTMENTS, IT’S ALREADY CALIBRATED

#VD 2001 / 2601 INITIAL POWER-UP: 

(Part #

ZDIVD2001TRIDNA

) When power is applied to the

control it will begin operating using the factory set point. The process temperature as measured by
the thermocouple will appear in the digital display and the 

LOAD (PV) 

 will indicate if the control

output (load) is on.

Key-pad:

                       - Parameter display / set-point programming.

                       -Press toRaiseTemperature of Oven.

                       -Press toLower Temperature of Oven.

WARNING:

To program Controller follow the following steps:(adjustments to be done only by qualified technicien)

 1) Press and hold 

for 5 seconds till

 appears, then keep pressing togling 

 till 

     appears. Press 

 till you find 0 100 this unlocks the program.

 2) Press 

till

 appears  press 

or 

  till you find 0.0.

 3) Press 

till 

 appears press 

 or 

  till you find 2.

 4) Press 

till 

 appears press 

 or 

  till you find 0.

 5) Press and hold 

for 5 seconds till

 appears, then keep pressing togling 

 till 

      appears  press 

or 

  till you find   (K thermocouple)

 6) Press 

till 

 appears  press 

or 

  till you find Fº or Cº

 7) Press 

till 

 appears press 

 or 

  till you find 0000.

 8) Press 

till 

 appears press 

 or 

  till you find 

 9) Press 

till 

 appears press 

 or 

  till you find 0.

10) Press 

till 

 appears press 

 or 

          till you find 625Fº or 330Cº.

11) Press 

till 

 appears press 

 or 

           till you find 5.0.

12) Press 

and 

  holding both to exit program.

13) Press and hold 

for 5 seconds till

 appears,

          then keep pressing togling 

 till 

          appears. Press 

 or 

till you find 0 001

           this locks the program.

14) Press 

and 

  holding both to exit program.

#11 Input Power

#12 Output to
       selenoid or SSR

#13 110v black

#14 110v white

#6 Thermocouple
         negative

#7 Thermocouple
         positive

WIRING CONNECTION

7a