Zeta Alarm Systems SIMPLICITY MICRO, Instruction Manual

ADDRESSABLE

FIRE ALARM PANEL

ci

i

m

p

l

i

S

y

t

Micro

INSTRUCTION MANUAL: 32 Device,4 Zone Addressable Fire Alarm Panel  

Approved Document No: GLT.MAN-129

PAGE 16

Issue : 1.0        Author: NRPJ      Date: 11/04/2008

POINT DISABLEMENT 

The Simplicity Plus panel can also disable individual devices (detector,  
call point, sounder or interface). To do this, enter CONFIGURATION  
MENU 2 and select EDIT DEVICE. Select the required device, then  
press GENERAL DISABLEMENT button. The Device label now flashes  
between the programmed label and Device Disabled. The general  
disablement LED will also be lit. This device is now disabled.  
To re-enable the device, press the disable button again. Note that the Zone disablement LED for this 
address will not light because this would suggest that the whole zone is disabled, so would be 
misleading. 

VIEWING DISABLEMENTS 

 
There are two ways to check for disablements: from the Disablement screen, or from the device status 
screen. 
 

To view from the disablement screen 

 
Press disable, then press NEXT to scroll through all the zones & sounders.  
 
If there are no disablements, the screen will show 
 
 
 
If the whole zone is disabled, the screen will show 
 
 
 
 
 
 
If there are one or more disabled points in this zone, the screen  
will show. 

(TIP: a quick way to enable several disabled points is to  
disable the zone, then re-enable it) 
 

To view from the Device Status screen 

 
Press enter then option 2 to select Device Status 
 
 
If a device is enabled, the screen will show 
 
 
 
 
If a device is disabled, the screen will show  
(Note that line 3 will flash between the device label and  
Device Disabled Message) 
 
 
 
 
If a device is in a disabled zone, the screen will show  
(Note that line 3 will flash between the device label and  
Zone Disabled Message) 

  Zone Disablement 
      Zone  1

Disabled 

Single Devices:  0 

  Zone Disablement 
      Zone  1

Enabled 

Single Devices:  0 

  Zone Disablement 

      Zone  1

Enabled 

Single Devices:  2 

Optical    

Analog:  25  Normal 

Fl 3 Bedroom 303 
Zone:01       Ad:016

Optical    

Analog:  25  Normal   

  Device Disabled 
Zone:01       Ad:016

Optical    

Analog:  25  Normal   

   Zone Disabled 
Zone:01       Ad:016

Optical    

Analog:  25  Normal   

  Device Disabled 
Zone:01  Lp:1 Ad:016