168
ADJUSTMENT
F273 F_02_201
F276
TENSIONING THE V-BELT
If the V-belt is properly tensioned - its de-
flection must be 7.5 mm when one belt is
subject to the force of 25 N.
Tension the V-belt to the prescribed
value after releasing the fixation screws
(1, 2).
∗
TENSIONING THE V-BELT OF THE
AC COMPRESSOR
If the V-belt is properly tensioned - its de-
flection must be 7.5 mm when the belt is
subject to the force of 25 N.
Tension the V-belt to the prescribed
value after releasing the fixation screws
of the AC compressor.
RETIGHTENING THE CYLINDER
HEAD
The engine cylinder head is retightened
with the cold engine in the prescribed or-
der.
Tractor type
Z 95 - Z 125 - (A)
Torque
160 - 180 Nm
Valve clear-
ance
0.25 ± 0.05 mm
ADJUSTING THE VALVE CLEARANCE
In the Z95 - Z125 tractors the clearance
of the valves is adjusted when the engine
is cold. The proper clearance of the suc-
tion as well as exhaust valves is
0.25±0.05 mm.
Alternation of the rocker arm move-
ments:
On movement of
the rocker arm of
cylinder no.
the valve of the
following cylin-
der is adjusted
1 4
2 3
3 2
4 1
Summary of Contents for FORTERRA 95
