7
DRIVING OPERATION
P+11NG202
P+11G203
STARTING THE ENGINE
1. Put the key in ignition - ”0” position.
2. Depress the clutch pedal.
3. Move the gear lever to the neutral po-
sition.
4. Turn the key to “I“ position. The glow
plug indicator illuminates.
5. Wait till the glow plug indicator goes
out (the time depends on the tem-
perature of the liquid coolant).
If the glow plug indicator does not
illuminate but flashes, there is an
error of the ignition system (Igni-
tion system error signals chap-
ter). Have the error repaired in a
specialized service station.
6. When the indicator goes out, turn the
key immediately (do not wait for long-
er than 5 sec. at maximum) to “II“ po-
sition (start).
7. After ignition, release the key immedi-
ately, it automatically turns back to ”I”
position.
Do not extend the starting
process to more than 15s.
8. After ignition, decrease the amount of
fuel gradually.