![background image](http://html1.mh-extra.com/html/zetron/4010/4010_programming-manual_3540962023.webp)
Section 3. Tutorial
025-9229C.1
3-5
Because this is a newly created system and no channels have been defined, the “Channel is
undefined” window will be displayed (see
X
Figure 3-5
X
). Press
ENTER
to accept the default
answer of “Yes” to create a new channel. Next the program will place the cursor in the
Channel Name field. Enter a channel name and press
ENTER
.
Select [E] Read Write drIve New Edit List Upload Program Quit ?Help
ZETRON MODEL 4010 CONSOLE PROGRAMMING SYSTEM
Position configuration
System configuration
Selection [P]
A. Channel Configuration
B. Channel Monitor Configuration
C. Channel Paging Configuration
D. Paging Format Configuration
E. Edit Custom Calls
F. Input / Output Configuration
G. TX Timeout
H. Priority Marker Frequency
I. Priority Marker Duration
J. Priority Marker Interval
K. Priority Marker Amplitude
L. Custom HLGT Duration
Selection [A]
Channel Number:
Channel Name:
Type of Channel:
Emergency ANI ACK:
Enter Channel Number (1-14) [ ]
Channel Name [ ]
SYSTEM CONFIGURATION
Channel is undefiined
Create new channel ? [Y] Yes No
Figure 3-5. “Channel is Undefined” Window
Next the program wants to know the type of channel for channel 1. For this tutorial, assume
you wish to create a tone control channel. Pressing the
DOWN ARROW
key twice moves the
menu bar to the Tone Control menu option, as shown in
X
Figure 3-6
X
.
Press
ENTER
to select tone control for channel 1.
Select [E] Read Write drIve New Edit List Upload Program Quit ?Help
ZETRON MODEL 4010 CONSOLE PROGRAMMING SYSTEM
Position configuration
System configuration
Selection [P]
A. Channel Configuration
B. Channel Monitor Configuration
C. Channel Paging Configuration
D. Paging Format Configuration
E. Edit Custom Calls
F. Input / Output Configuration
G. TX Timeout
H. Priority Marker Frequency
I. Priority Marker Duration
J. Priority Marker Interval
K. Priority Marker Amplitude
Selection [A]
Channel Number: 1
Channel Name: Channel-One
Type of Channel:
Emergency ANI ACK:
Enter Channel Number (1-14) [ ]
Channel Name [ ]
SYSTEM CONFIGURATION
A. DC Control-momentary
B. DC Control-constant
C. Tone Control
D. Local (E&M) Control
E. Delete Channel
Selection [A]
Figure 3-6. Type of Channel Window
Now the program needs to know if the tone control uses a standard or custom protocol. For
simplicity, assume you want to use standard tone control.
Summary of Contents for 4010
