Section 4. Program Operation
Select
E
for edit from the MAIN menu and then select
P
to display the next menu. Next,
select
D
for ANI Decode / Display and the ANI menu will be displayed. The two ANI menu
selections are described below:
4-12
025-9229C.1
1.
ANI Operating Mode
To enable or disable ANI decoding, select Operating Mode from the ANI menu. The
window shown in Figure 4-9 will open.
Select option
A
to disable or enable ANI decoding. Select option
B
to enable only
selected channels. Select option
C
to configure ANI Channel Unmute operation.
Select option
D
for all channel ANI display. Select option
E
to configure Emergency
ANI Acknowledge.
A. No ANI display
B. Selected Channels
C. ANI Channel Unmute Operation
D. All Channels
E. Emergency ANI Acknowledge
ANI Operation [C]
Figure 4-9. ANI Operating Mode Window
Selecting option
C
opens the window shown in Figure 4-10.
Unmute upon receiving
ANI? [Y] Yes No
Figure 4-10. ANI Channel Unmute Window
Selecting option
D
sets the configuration to allow the ANI data to be displayed on
every configured channel.
Selecting option
E
opens the window shown in Figure 4-11.
Enter Channel Number from 1 to 14
Channel Number [_]
EMERGENCY ANI ACK CHANNELS
Figure 4-11. Emergency ANI ACK Channels Window
After entering a channel number, the window shown in Figure 4-12 is displayed. Use
the keyboard arrow keys to edit your selection.
Summary of Contents for 4010
