123
Description of Key Functions and Parameters
Wild Card I On/Off
Toggle the Wild Card I function on the appropriate tone controlled radio channel. Refer to
DC and Tone Remote Function Definitions
on page 110 for the function actually
transmitted.
Wild Card II On/Off
Toggle the Wild Card II function on the appropriate tone controlled radio channel. Refer to
DC and Tone Remote Function Definitions
on page 110 for the function actually
transmitted.
Custom Channel Functions
The Custom Channel Functions are used to customize the channel card to the radio. Each
key must have the desired transmit and receive tones or DC currents assigned.
DC
If the channel is defined as a DC controlled channel, choose the desired current for receive
and transmit.
Tone
If the channel has been defined as a tone controlled channel, you will be asked to select the
desired transmit and receive tone. The receive tone selected will be sent whenever the key
is pressed. The transmit function will be sent on transmit.
System Functions
System functions are assigned to individual keys, but may affect more than a single
channel.
Transmit Keys
The following transmit functions may be assigned to a specific key.
Normal Tx
This key will cause the selected channel(s) to transmit. This is functionally the same as the
optional foot-operated PTT switch. Normally only one TX key is assigned per position.
Transfer Instant Transmit
This key, when pressed, will cause the next channel “Select” key pressed to become an
“instant transmit” key for the channel. The selected channel will not change. This key is
used to eliminate the need for individual Instant transmit keys on each channel.