ZETRON 748 Technical Manual Download

Page: 191 / 259

Feature Set Reference

025-9368H

177

Unerase Call Detail Records (SMDR)

The storage capacity of Call detail records will only hold 4000 records and must be downloaded
before it reaches capacity. If the Call detail records are not downloaded, additional calls after record
the maximum records will be lost. Once you have downloaded the Call detail records, you need to
clear the number of Call detail records in storage. If by chance you do clear the Call detail records,
you can use the

Unerase Call detail records

command to undo the erasure. The Unerase command

will only work if there haven't been any new entries into the “call detail storage” between the time
you cleared it and the time you are attempting to restore it. This command simply restores the
number of records. This allows you to download or otherwise extract the billing information from
the Model 748.

How to program it:

Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.

Once connected to the Model 748 and the Main Menu is on the screen, type “4” and press

ENTER

the Accounting Menu will be displayed. Select the item number for

Unerase Call detail records

and

press

ENTER

. The Model 748 will prompt you to confirm that you want to restore the Call detail

records. Press “Y” to confirm or “N” to abort and press

ENTER

User Range

User range

sets the user number whose data is currently displayed in the Interconnect User Menu.

This command selects the particular user whose data you wish to view or program. This can be a
single user or a block or range of users.

Once a user range has been selected, it remains unchanged until you exit or terminate the
programming session. This means you can set User range to the desired user, and go back to another
menu to verify or change a setting. When you return to the User Menu, it will display the same user.

The user range may be set to anything, as long as the starting and ending users are within the
specified range (1-99 or 750) and the starting user number is lower than the ending user number.

To select a single user, enter the user number at the prompt for “Starting user” and press

ENTER

. At

the second prompt “Ending user” just press

ENTER

. The Interconnect User Menu will be re-printed

with the selected user's data.

To select a range or block of users, enter the lower user number at the prompt for “Starting user” and
press

ENTER

. At the second prompt “Ending user”, enter the higher user number and press

ENTER

The Interconnect User Menu will be re-printed using the “Starting user” data.

Block or Range programming:

The Model 748 supports block or range programming of most items in the User menu. You can set
them one at a time or set the whole block or range with the same setting.

When you have a range of users specified and select a command that supports block programming,
the Model 748 will prompt you as to whether you want to program all of them (in the user range) in
one keystroke, or if you would like to review and alter each of them individually. If you elect to let
the Model 748 program them all without reviewing them, it will change all of the users in the user