VIII. Troubleshooting
Trouble
Procedure
Unit not turning on
Remove the plastic insulators from battery cover
Fully charge the battery for about 4 hours
Reset the unit by flipping the side switch off and on.
Unit not charging
Replace the battery or USB cable adapter
Blue light flashes rapidly
Format the MicroSD memory card to remove any
corrupted files; Insert the MicroSD memory card is in
unit. MicroSD memory card maybe full; Ensure unit is
charged.
Remote controller is hard to use
Remove the plastic insulator from the battery cover on
the back; Hold it at least one foot away from the
device; Wait a few seconds in between actions.
Computer does not detect it
Try a different USB port, a different computer or
replace the USB cable.
Clock’s screen flashes or character is displayed
incompletely
Maybe low on battery, try r
echarging the unit.
Sound is recorded with noise or video is not clear
Maybe low on battery, try r
echarging the unit. Format
the MicroSD memory card to remove any corrupted
files;
Screen looks hazy or scratched.
The screen has a fine protective plastic layer. Remove
it by ripping a hole with your nail, than pull the plastic
around towards the center of the screen.
Video stops recording
Maybe low on battery, try r
echarging the unit.
Memory maybe full or corrupted. Delete files or
format memory.
Other problems
Please contact local retailer.
IX. Included Accessories
Mini USB to USB Cable Adapter This Manual Driver & Utilities Disk A/C USB Charger
