zClock-150HD
Notice
: The information in this manual is subject to change without notice. Zetronix Corporation shall not be liable for technical or editorial
errors or omissions contain herein; nor for incidental or consequential damages furnishing from the furnishings or use of this material.
Page 9
Setting an Alarm
Press the Mode button to enter Alarm mode. Once Alarm Mode is
pressed --:-- will appear on the LCD, to start setting hour and minute
press the Set Button. Once the Set button is pressed choose the hour
by pressing up or down. Once the hour is set press the set button
again to choose the minute by pressing up or down. Once that is
done press the Set button again to choose the Snooze ( 1 – 60 min),
Press the set button again to choose Alarm Noise (1-6)
Press the Mode button at any time to exit Alarm mode and display
regular time. In the Alarm Mode Press the UP to turn off or on the
alarm and the snooze function when the Alarm is ON and DOT LED
will glow to the left of the time. When alarm is off the LED will not be
on, and when the Snooze is on the LED will flash.
Alarm Off Alarm On Snooze On
