Zeus Iceborn, Device Manual

3

USING THE ZEUS ICEBORN

TM

To use the device after the water has frozen 
overnight, attach one of the short whips (a.1 or a.2) 
to the mouthpiece of your desired vaporizer and 
connect the other end of the whip to the entry whip 
connector on the lid of the 

ZEUS Iceborn™

. Two 

short whips (a.1, a.2) of different sizes are provided 
in the package; these will fit most portable and 
stationary vaporizer mouthpieces. Use the long whip 
(a.3) to connect to the exit whip connector on the 
lid. Attach the mouthpiece (b) to the open end of the 
long whip. Once your vaporizer has reached the 
desired temperature, you are ready for the 

ZEUS 

Iceborn™

 experience!

Notes:

-Water droplets will condense on the surrounding 
areas of the unit during use and gather in the tray 
below the ice chamber. Ensure to empty this Water 
Tray after every few uses.
-The short whips can also be used on the exit whip 
connector. Though using a short whip at the exit will 
result in less reach for larger groups, it will greatly 
increase the cooling effect of the vapor. 
-In order to enhance the cooling effect from the first 
draw, the whips can also be left to chill in the freezer.

a.3

Long Whip

Short Whip

Vaporizer 

Mouthpiece

a.1

a.2

or

b

Exit Whip Connector

(connect to mouthpiece)

Entry Whip Connector

(connect to vaporizer)