Hardware installation
13
2.6 Leveling the scanner base and book cradle
For the correct function of the scanner and the camera it is absolutely necessary to level
both, the scanner base and the book cradle.
First the scanner base must be leveled. After that, the top of the glass plate of book cradle
will be leveled against the scanner base.
During the adjustment of scanner base and book cradle, the scanner unit must be
moved to the ‘home’ position, which is the outer left position.
Otherwise the
scanner unit could apply pressure to the glass plate and damage it.
To level the scanner base, use a spirit level [24]. Put the spirit level on top of the front side
guide rail [25] like shown in Fig. 18. Now you can adjust the level from left to right by
turning the adjustment screws [26] at the scanner base up- or downwards (see also Fig.
13).
Fig. 18
24
25
26
Summary of Contents for OK 300 Hybrid Color
