Web Server
~
19
~
The output power is be decided by DRMs command. Please refer the section 4.3.
Fig. 5-9: Set parameters based on AS DRMs safety
The “output power” value is e when P >= P_meter
Table 5-3: The indicator of the Item
Parameter
Definition
E
Q value: The reactive value of inverter when
received the AS DRM7 Command
f
It expect power reading of the energy meter
b)
Active power feed-in at over frequency Limit
The Fig. 5-10: Set active power feed-in at over frequency Limit
c)
Active power feed-in at over volt Limit
The Fig. 5-11: Set active power feed-in at over volt limit
