Contents
~
8
~
4.2
* Connecting via WiFi
If users use the ComBox’s WiFi to connect the router for remote monitoring, the
connection diagram is shown in Fig. 4-2.
World wide web
Wireless Router
WLAN
Inverter
WiFi
Fig. 4-2: WiFi connection
In order to achieve remote monitoring reliably, the following steps must be
taken.
Step1: Power on the inverter, which will also power ComBox, and use a mobile
device or laptop to search for the wireless access point (AP) of the Combox WiFi.
A new AP of ZEVERSOLAR -XXXX is displayed, Select this AP to connect. The
password is “zeversolar”. As shown in Fig. 4-3.
Fig. 4-3 WiFi connection page
1.
"XXXX" stands for the last four digits in the Registry ID of
the ComBox.
Step2: Start the web browser and enterStep3: Select the wireless page and select a wireless local network in the area
to connect. The Password/Security Key dialog box opens, as shown in Fig. 4-4.
