2.
For the installation dimension refer to
the current spare parts lists.
Apply a thin layer of
0671.190.065 [Silicone grease] outside to the
tachometer.
3.
Push the tachometer into the bush so that
approx. 1 mm protrudes from the contact
face of the compact bearing.
Fig. 242
4.
Align the recess of the
AA00.387.830 [Pressing fixture no.] on the
boss of the hub carrier. Push
AA00.387.830 [Pressing fixture no.] slowly
until contact position with the hub carrier and
position the tachometer.
Fig. 243
5.
Push the clamp (2) into the hole on the
screen sheet, until engagement of the
securing clips.
6.
Push the cable (1) into the clamp (2).
Fig. 244
Assembly
EN 4472.751.001 - 2015-11
119
Summary of Contents for AV 133
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES...
Page 137: ......
