50. Press bearing outer rings onto the output
gear.
Fig. 184
51. Place the bearing outer rings onto the
tapered roller bearing.
52. Set Output gear bearing 0.03 mm preload–
0.03 mm clearance
Always put a suitable ring under the lower
bearing outer ring and onto the upper
bearing outer ring.
53. Measure total height of output gear, tapered
roller bearing and rings.
Total height A = e. g. 165.05 mm
Fig. 185
54. Measure height of the rings.
Total height of the rings B = e. g. 30.00 mm
55. Calculate total height of output gear and
tapered roller bearing.
Calculation example:
C = A – B
C = 165.05 mm – 30.00 mm
C = 135.05 mm
Fig. 186
Assembly
98
EN 4472.751.001 - 2015-11
Summary of Contents for AV 133
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES...
Page 137: ......
