Maintenance and Installation Instructions
Edition 11.07.2006
14 of 30
Mounting of the transmission top section GK 40
i)
Apply a thin layer of LOCTITE 574 onto the
transmission plane face.
j)
Place the transmission top section onto the
transmission housing that the cyl. pin (Item
01) in the transmission housing is
positioned into the fitting bore in the
transmission top section.
k) Bolt together the transmission top section
and the transmission by means of Allen
screws (Item 02).
l)
The transmission top section is additionally
bolted with the transmission housing by
means of 2 Allen screws (Item 03) and
hexagon nuts (Item 04).
m) Tightening torque:
46 Nm
n) Put on the centering ring (Item 05) and
fasten it tightly with screws to the pivoted
bogie bearing.
Figure 10
Figure 09
01
02
02
05
03
04