3.2 REMOVAL DIPSTICK
Unscrew dipstick (item 1, Fig. 2-1) (counterclockwise)
and pull out of housing.
Replace O-Ring if present (check parts list section 11).
3.3 REMOVAL BREATHER VALVE
Unscrew breather valve (item 1, Fig. 3-1). Wash valve
in a detergent, let dry and dip in oil, then let oil drip off.
3.4 OUTPUT FLANGE
Unscrew socket head bolts (item 1, Fig. 4-1) up to four
opposite ones.
Apply forcing plate and position screw heads with re-
gard to forcing plate boreholes by means of Allen key
( item 1, Fig. 4-2). Using an Allen key, turn screws posi-
tioned in the output flange against forcing plate.
This will press the output flange off the output shaft
(Fig. 4-2).
10
Repair Manualand Spare Parts List
Section 3
1
FIG. 2 - 1
1
FIG. 3 - 1
1
FIG. 4 - 1
1
FIG. 4 - 2
