Output shaft seal
Using a mandrelpunch top the output seals out from
the housing. Discard seals and replace with a new seal
(Fig. 6-3b and Fig. 6-3a item 1).
3.6.4 Removal of fluid inlet pipe
For replacing the seal (item 3, Fig. 6-4):
.
Remove plate screws (1)
.
Remove suction pipe (2)
.
Drive out seal(3) after removing dipstick and filter.
13
Repair Manualand Spare Parts List
Section 3
1
FIG. 6 - 3b
3
2
1
FIG. 6 - 4