3.8 REVERSING CLUTCH PACK
3.8.1 Removal of the clutch discs
.
Remove the tapered roller bearing inner races
(item 1 and 2, Fig. 8-1a) and the gear (item 3,
Fig. 8-1a) using the tools described in section 2.
.
Lift butting rings (item 1, Fig. 8-1b) off using two
screwdrivers.
.
Pull gear (item 2, Fig. 8-1b) and needle bearings
off.
.
Removalof pressure plate: Pressing snap ring
against periphery of pressure plate (item 1, Fig.
8-1c) by means of screwdrivers. Extract it together
with end disc (item 1, Fig. 8-1c). The clutch discs
can now be removed from the coupling housing.
Repeat same procedure to remove pressure plate
on the opposite side.
15
Repair Manualand Spare Parts List
Section 3
1
3
2
FIG. 8 - 1a
1
2
FIG. 8 - 1b
1
FIG. 8 - 1c
