Using an S/PDIF optical cable for digital audio
For televisions equipped with an S/PDIF optical output, you may
connect an optical cable (not included) to the TV’s connection panel.
Connect the other end of the optical cable into the audio
transmitter’s
“OPTICAL IN”
port (supports 96kHz/24bit).
OPTICAL-RCA/3.5MM
AUDIO SELECT SWITCH
If you have a sound bar or other audio equipment already connected to
your television, you can use the audio transmitter’s audio passthrough
connection labeled
"OPTICAL OUT"
to connect to your other audio
equipment.
NOTE 1: “Dolby / DTS” is not supported .When using TV optical out ,
must set audio format to “PCM” .
NOTE 2 : When connected to the transmitter's
“OPTICAL IN”
, you
can switch to the
OPTICAL AUDIO SELECTION
.
OTHER CONNECTION OPTIONS
