Zgonc Yellow GARDEN LINE YGL N.G. 32/2, Translation From The Original Instruction Manual

23

GB

4. 

 Maintenance and storage

• 

Keep all nuts, bolts, and screws tight to be sure the 
appliance is in safe working condition.

• 

Check the grass catcher frequently for wear or dete-
rioration.

• 

Replace worn or damaged parts for safety.

• 

For rotary mowers, ensure that only replacement cut-
ting means of the right type are used.

–

Never store the equipment with petrol in the tank 
inside a building where fumes can reach an open 

flame or spark;

–

Allow the engine to cool before storing in any en-
closure;

–

To reduce the fire hazard, keep the engine, silencer, 

battery compartment and petrol storage area free 
of grass, leaves, or excessive grease;

–

If the fuel tank has to be drained, this should be 
done outdoors.

Special satety warning

1. 

Grip the handles of the brush cutter firmly with both 

hands. If you suspend the work, place the throttle 
into the idling position.

2. 

Always be sure to maintain a steady, even posture 
while working 

3. 

Maintain the speed of the engine at the level required 
to perform cutting work and never raise the   speed 
of the engine above the necessary level. 

4. 

If the grass gets caught in the blade during opera-
tion, or if you need to check the unit or refuel the tank 
always be sure to turn off the engine.

5. 

If the blade touches a hard object like a stone im-
mediately stop the engine and check if something is 
wrong with the blade. If so, replace the blade with 
a new one. 

6. 

If someone calls out while working, always be sure 
to turn off the engine before turning around.

7. 

Never touch the spark plug or plug cord while the 
engine is in operation. Doing so may result in being 
subjected to an electrical shock. 

8. 

Never touch the muffler, spark plug or other metallic 

parts of the engine while the   engine is in operation 
or immediately after shutting down the engine. Doing 
so may  result in serious burns. 

9. 

When you finish cutting in one location and wish to 

continue working in another spot, turn off the engine 
and turn the machine to have the blade facing away 
from    your body. 

10. 

Check that the cutting attachment stopped turning 
under the engine idle before starting to use the ma-
chine. 

6. Technical data

YGL N.G. 32/2

Technical data
Cutting data grass trimmer
Cutting circle diameter of 

line mm

430

Cutting line diameter mm

2 x 2.4

Cutting line length m

4

Max. cutting speed max. 

min

-1

6400

Cutting data brush cutter
Cutting circle diameter of 

blade mm

255

Cutter balde thickness mm

1.4

Teeth quantity

3

Max. cutting speed max. 

min-1

7400

Power unit
Displacement ccm

32.6

Max. engine output W

900

Fuel tank capicity l

0.9

Engine type

2-stroke engine, air-cooled

Weight kg

7.2

Subject to technical changes!

Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L

pA

 = 96.8 dB(A)

Sound power L

WA

 = 114 dB(A)

Uncertainty K

PA

 = 2.5 dB(A)

Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A

hv

 = 8.7 m/s

2

Uncertainty K

PA

 =

1.5 m/s2

Reduce noise generation and vibration to a minimum!
•  Use only equipment that is in perfect condition.
•  Maintain and clean the equipment regularly.
•  Adopt your way of working to the equipment.
•  Do not overload the equipment.
•  Have the equipment checked if necessary.
•  Switch off the equipment when not in use.
•  Wear gloves.

In these operating instructions we have marked the 
places that have to do with your safety with this sign: 

m

7. Before starting the equipment

Each time before use, check the following: 

• 

That there are no leaks in the fuel system.

• 

That the equipment is in perfect condition and that 
the safety devices and cutting devices are complete.

• 

That all screws are securely fastened.

• 

That all moving parts move smoothly.

1 

Fuel and oil

Recommended fuels
Use only a mixture of unleaded petrol and special 
2-stroke engine oil. Mix the fuel mixture as indicated in 
the fuel mixing table.