Manual de operaciones
www.zigor.com
11
3.
Monitor unit
4.
Intelligent slot
•
ECU unit
Fig. 2-13 ECU unit
The elements that compose the ECU unit (Fig. 2-13) are:
1.
PARALLEL port
2.
LBS port
3.
LED
•
Dry-contact unit
Fig. 2-14 Dry contact unit
The elements that compose the Dry contact unit (Fig. 2-14) are:
1.
EPO port: NO-12V: normally open port; NC-12V: normally close port;
2.
SWITCH STATUS: OUT-0V: output breaker auxiliary contact signal port; MT-0V: maintenance
breaker auxiliary contact signal port; BP-0V: bypass breaker auxiliary contact signal port; BAT-
0V: battery breaker auxiliary contact signal port;
3.
The other port: BTG-0V: battery grounding detect signal input port; DRV-0V: battery breaker
driver signal output port; SPD-0V: SPD detect signal input port; GEN-0V: generator detect
signal input port;
4.
BP_FEEDBACK: PIN1_NC, PIN2_NO, PIN4_common
5.
Optional dry contacts: 6 ports, can optional by LCD.