Operation manual
www.zigor.com
17
4.1.2
Display information
In the below table is shown and explained all the elements that can appear in the display:
SYMBOL
DESCRIPTION
UPS general information
Indicates input, output, battery and UPS general information. This section is explained in the
Table 4-3.
Backup time, alarm and setting information
Indicates the remaining backup time when UPS is in battery mode.
H: hours, M: minutes
Indicates warning code (warning symbol blinking).
Indicates fault code (error symbol lit).
Indicates parameter number in setting menu.
Battery information
Indicates the battery capacity: 0-24 %, 25-49 %, 50-74 % y 75-100 %.
Indicates low battery level.
Load information
Indicates load level: 0-24 %, 25-50 %, 50-74 % y 75-100 %.
Indicates overload.
Indicates the load or the UPS output is short circuited.
Mute operation
Indicates that the UPS alarm is muted.
UPS status information
Indicates UPS is connected to the mains.
Indicates rectifier is working.
Indicates inverter is working.