- 2 -
1. INTRODUCTION
This DT58 Series Digital Multimeter is a compact precision, battery operated,
LCD display 3-½ digits Digital Instrument..
Superiority:
9
High
accuracy
9
Digital height 22mm
9
Single 30 position rotary switch for FUNCTION and RANGE
selection, allows fast and convenient operation.
9
Curvilinear mode soft case.
9
Colored indication jack with fully protection test leads.
9
Lower overage power Auto-Power Off
2. GENERAL
SPECIFICATION
1) Display: 3-½ digits LCD with a maximum reading of 1999.
2) Measurement rate: updates 2-3/sec.
3) Over range indication: “1” figure only in the display
4) Automatic negative polarity indication.
5) The
“
” is displayed when the battery voltage drops below the
operating voltage.
6) Full range over load protection.
7) Capacitance
measurement
Auto-Zeroing.
8) Auto Power Off: It will be automatically cut off in about 15 minutes after
the power is turned on. It needs to be turned off and turned on again to
continue the power.
9) Operating temperature: 0°C~40°C, 0~75% R.H.
Storage temperature: -10°C~50°C, 0~75% R.H.
10) Power: Single standard 9V battery IEC 6F22,NEDA 1604, JIS 006P.
11) Dimensions: 176L*88W*38Hmm.
12) Weight: approx 310g (including battery)
13) Accessories: test leads (pair), spare fuse 0.5A piece in case (model
DT5801 fuse 2A), K-type thermocouple wire (model DT5807/DT5808
only), operator’s manual.
3. ELECTRICAL
SPECIFICATIONS
Accuracy is given as ± (% of r number of least significant digits) for
one year, at 23°C±5°C RH<75%
1) DCV
